Kitchen Counter Tile Ideas - Tile is durable and resistant to stains, moisture and heat that is why it is a very good choice for your kitchen table. Using ceramic tile can help you save a lot of your labor costs because even an average, practical homeowner can do the job of installing it. So if you have not worked with previous ceramic tiles, then mounting kitchen counter tile is a perfect project for a novice like you because the table is a relatively small surface and horizontal.
As always, the key to successful work of do-it-yourself plan. So before you start tiling your desk, plan first the installation work in order to reduce the number of tiles you have to cut. Before choosing the kitchen counter tile to use, measure the counter top with caution. In estimating the number of tiles needed to cover it, make sure to allocate space for specialty tiles like those required for a backsplash or for edging.
Buy slightly more tiles that what you need so you have extra in case of breakage or cutting problems. In general, the rule of thumb is to purchase ten percent additional tiles. After purchasing, lay out the kitchen counter tiles on the place where they will be installed to ensure that you have sufficient tile and to know where cuts will be made.
Materials needed:
Measuring tape, Tile cutter, Hammer, Level, tile, grout float, Sponge, Pry bar, soft fabric, cutting Tile saw, trowel notched, safety glasses, Mastic adhesives, Wall tiles, Screwdriver, parallel, Grout, 2 x 4 x 2 inches board wrapped in carpet
Installation Steps:
1. Find and mark the hub of the area where you will install the tiles. Draw a reference line on the sign said.
2. Lay out a row of kitchen counter tile to find out the end of the backsplash.
3. In parallel to the length and level, determines the lowest point on the back counter. It will be the largest gap between the table and the parallel rate.
4. From the lowest area on the counter, label the wall at a height equivalent to two tiles. Then lengthen the reference line up to that height then across the spot where you will install the tiles.
5. Turn off or disconnect the electrical current flowing to the switches and outlets in the place to be tiled.
6. Cover the surface of the table with a hefty paper to keep them from scratching.
7. Apply adhesive to the wall, starting from the reference line, raking the adhesive downward. Then from the back of the table, sweep adhesive upward. Make sure that the mastic is evenly distributed.
8. Begin mounting the tiles by putting a tile under the reference line, making sure that the line with the reference line and mark in the center.
9. Keep on mounting tiles adjacent to the reference line and check them regularly use a ruler to make sure that they are well-aligned.
10. After installing the tiles under the reference line, begin installing the tiles at the top of the line. To ensure that the tiles are installed straight, perform the installation in a pyramid order.
11. When all the tiles are already in place, put a board covered with carpet over them and beat it using a hammer. This will lock them securely in place.
12. Put bullnose tiles on the edges of your backsplash, applying mastic at the back of the bullnose tiles.
13. Let dry mastic.
14. Apply the grout using a grout float made of rubber.
15. Removing excess grout using a damp sponge. Let the grout dry.
16. Replace electrical fixtures that you removed before the kitchen counter tile installation.
Indeed, placing tile kitchen table can be very easy and the results are really satisfying.
